Installation Instructions

10GBASE-ER/EW SFP+ specifications
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW
SFP+. The reach for this SFP+ is up to 40 km at a wavelength of 1550 nm. The part number
of this SFP+ is AA1403013-E6.
For more information about the 10GBASE-ER/EW SFP+, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Table 18: IEEE 802.3ae 10GBASE-ER/EW SFP+ specifications
Parameter Specifications
Line rate (nominal) 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm
(10 GbE)
Center wavelength range 1530 to 1565 nm; nominal 1550 nm
Distance Up to 40 km
Link optical power budget 15 dB
Transmitter and dispersion power penalty 3.0 dB at 40 km
Transmitter characteristics
Launch power -– 4.7 to 4.0 dBm
Minimum side mode suppression ratio 30 dB
Minimum launch power in OMA minus
transmission and dispersion penalty (TDP)
– 2.1 dBm
Minimum optical modulation amplitude – 1.7 dBm
Maximum average launch power of OFF
transmitter
-– 30 dBm
Minimum extinction ratio 3.0 dB
Maximum RIN
12
OMA – 128 dB/Hz
Maximum optical return loss tolerance – 21 dB
Receiver characteristics
Average receive power for BER 10
-12
– 15.8 dBm to – 1.0 dBm
Maximum receive power for damage 4.0 dBm
Maximum receiver sensitivity in OMA – 14.1 dBm
Maximum receiver reflectance – 26 dB
Stressed receiver sensitivity in OMA – 11.3 dBm
SFP+ specifications
58 Installation — SFP and SFP+ transceivers January 2014
Comments? [e-mail]