Installation Instructions

Table Of Contents
Figure 4: SFP+ bottom label
General SFP+ specifications
The following table describes general SFP+ specifications.
Table 16: General SFP+ specifications
Parameter Specifications
Dimensions (H x W x D) 13.4 x 8.50 x 56.4 millimeters (mm)
0.53 x 0.33 x 2.22 inches (in.) unless
otherwise stated
Connectors LC ultra physical contact (UPC)
Storage temperature –40 to 85C
Operating temperature 0 to 70 ºC for RoHS -E6 models
SFP+ transceiver specifications
The following sections provide specifications for supported SFP+ transceivers.
10GBASE-LR/LW SFP+ specifications
The 10GBASE-LR/LW SFP+ provides 10 GbE or OC-192 service at a nominal wavelength of
1310 nm. This SFP+ can attain link lengths of up to 10 km.
The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW
SFP+. The part number of this SFP+ is AA1403011-E6.
For more information about the 10GBASE-LR/LW SFP+, including test and measurement
information, see the IEEE 802.3ae standard.
SFP+ specifications
56 Installation — SFP and SFP+ transceivers January 2014
Comments? infodev@avaya.com