Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Avaya Virtual Services Platform 4000 regulatory information and safety precautions
- International regulatory statements of conformity
- National electromagnetic compliance (EMC) statements of compliance
- FCC statement (USA only)
- ICES statement (Canada only)
- CE marking statement (Europe only)
- European Union and European Free Trade Association (EFTA) notice
- VCCI statement (Japan/Nippon only)
- BSMI statement (Taiwan only)
- MIC notice (Republic of Korea only)
- National Safety Statements of Compliance
- EN 60950 statement
- NOM statement (Mexico only)
- Información NOM (unicamente para México)
- Denan statement (Japan/Nippon only)
- National Environmental Statements of Compliance
- Restriction on Hazardous Substances Directive Compliance Statement
- WEEE Directive Compliance Statement
- Chapter 2: Introduction
- Chapter 3: New in this release
- Chapter 4: Safety and equipment care information
- Chapter 5: Small form factor pluggable transceivers
- Chapter 6: Small form factor pluggable plus transceivers
- Chapter 7: SFP specifications
- SFP labels
- General SFP specifications
- 1000BASE-T (RJ-45) SFP specifications
- 1000BASE-SX (LC) DDI SFP specifications
- 1000BASE-LX (LC) DDI SFP specifications
- 1000BASE-XD DDI 1310 nm SFP specifications
- 1000BASE-XD DDI 1550 nm SFP specifications
- 1000BASE-ZX DDI SFP specifications
- 1000BASE-XD CWDM (LC) SFP specifications
- 1000BASE-ZX CWDM (LC) SFP specifications
- 1000BASE-BX10 DDI SFP specifications
- 1000BASE-EX DDI SFP specifications
- 1000BASE-BX40 bidirectional SFP specifications
- 100BASE-FX SFP specifications
- Chapter 8: SFP+ specifications
Parameter Specifications
Data rate 1.0 Gb/s
Line rate (8B/10B code) 1.25 Gb/s
Distance Up to 10 km
Wavelength 1310 nm and 1490 nm
Link optical power budget 11.0 dB
Maximum transmitter and dispersion power
penalty
3.3 dB
Transmitter characteristics
Maximum launch power – 3.0 dBm
Minimum launch power – 9.0 dBm
Receiver characteristics
Maximum receiver sensitivity – 19.5 dBm
Maximum input power (maximum average
receive power)
– 3.0 dBm
1000BASE-EX DDI SFP specifications
The following table describes the 1000BASE-EX DDI SFP. This SFP operates at 1550 nm and
has a reach of up to 120 km. The part number of this SFP is AA1419071-E6.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 14 dB of attenuation is present
between the transmit and receive ports.
To attain the BER of 10
-12
, the minimum attenuation between the transmit and receive ports
is 15 dB.
Table 13: 1000BASE-EX DDI SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.2 W
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gb/s
1000BASE-EX DDI SFP specifications
Installation — SFP and SFP+ transceivers January 2014 51