Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Avaya Virtual Services Platform 4000 regulatory information and safety precautions
- International regulatory statements of conformity
- National electromagnetic compliance (EMC) statements of compliance
- FCC statement (USA only)
- ICES statement (Canada only)
- CE marking statement (Europe only)
- European Union and European Free Trade Association (EFTA) notice
- VCCI statement (Japan/Nippon only)
- BSMI statement (Taiwan only)
- MIC notice (Republic of Korea only)
- National Safety Statements of Compliance
- EN 60950 statement
- NOM statement (Mexico only)
- Información NOM (unicamente para México)
- Denan statement (Japan/Nippon only)
- National Environmental Statements of Compliance
- Restriction on Hazardous Substances Directive Compliance Statement
- WEEE Directive Compliance Statement
- Chapter 2: Introduction
- Chapter 3: New in this release
- Chapter 4: Safety and equipment care information
- Chapter 5: Small form factor pluggable transceivers
- Chapter 6: Small form factor pluggable plus transceivers
- Chapter 7: SFP specifications
- SFP labels
- General SFP specifications
- 1000BASE-T (RJ-45) SFP specifications
- 1000BASE-SX (LC) DDI SFP specifications
- 1000BASE-LX (LC) DDI SFP specifications
- 1000BASE-XD DDI 1310 nm SFP specifications
- 1000BASE-XD DDI 1550 nm SFP specifications
- 1000BASE-ZX DDI SFP specifications
- 1000BASE-XD CWDM (LC) SFP specifications
- 1000BASE-ZX CWDM (LC) SFP specifications
- 1000BASE-BX10 DDI SFP specifications
- 1000BASE-EX DDI SFP specifications
- 1000BASE-BX40 bidirectional SFP specifications
- 100BASE-FX SFP specifications
- Chapter 8: SFP+ specifications
Parameter Specifications
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gb/s
Line rate (8B/10B code) 1.25 Gb/s
Link optical power budget 17 dB
Maximum dispersion power penalty 1 dB at 40 km
Transmitter characteristics
Launch power – 4.0 to 1.0 dBm
Receiver characteristics
Receiver sensitivity – 21 dBm
Maximum receiver power – 3.0 dBm
1000BASE-ZX CWDM (LC) SFP specifications
The following table describes specifications for CWDM SFPs numbered AA1419061-E6 to
AA1419068-E6.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 8 dB of attenuation is present
between the transmit and receive ports.
Table 11: 1000BASE-ZX CWDM (LC) SFP (70 km) specifications
Parameter Specifications
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gb/s
Line rate (8B/10B code) 1.25 Gb/s
Link optical power budget 24 dB
Maximum dispersion power penalty 2 dB at 70 km
Transmitter characteristics
1000BASE-ZX CWDM (LC) SFP specifications
Installation — SFP and SFP+ transceivers January 2014 49