Installation Instructions

Job aid
SFP+ transceivers are hot-swappable input and output enhancement components that allow
10 gigabit connections.
All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision keying and low
interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 2: Compatible SFP+s
Hardware Description Part number
10GBASE-LR/LW SFP+ 1310 nm SMF with a range up to 10 km AA1403011-E6
10GBASE-ER/EW SFP+ 1550 nm SMF with a range up to 40 km AA1403013-E6
10GBASE-SR/SW SFP+ 850 nm with a range up to 300 m AA1403015-E6
10GBASE ZR/ZW SFP+ 1550 nm 70km SMF AA1403016-E6
10GBASE-ER CWDM SFP
+
1470 to 1610 nm with a range up to 40
km
AA1403153-E6 to
AA1403160-E6
10GBASE-LRM SFP+ 220 m, 1260 to 1355 nm; 1310 nm
nominal MMF
AA1403017-E6
10GBase-CX 4-pair twinaxial copper cable that plugs
into the SFP+ socket and connects two
10 Gb ports. The supported lengths
are 3 m, 5 m, and 10 m.
AA1403018-E6 to
AA1403020-E6
Important:
Avaya recommends the use of Avaya branded SFP+ transceivers as they have been through
extensive qualification and testing. Avaya will not be responsible for issues related to non-
Avaya branded SFP+ transceivers.
For more information about SFP+ specifications, see
SFP+ specifications on page 55.
Installing an SFP+
Before you begin
Important:
Do not install an SFP+ transceiver in an SFP slot. The two transceivers look the same but
function differently.
Small form factor pluggable plus transceivers
38 Installation — SFP and SFP+ transceivers January 2014
Comments? [e-mail]