Installation Instructions

Hardware Description Part number
1000BASE-EX DDI SFP 1550 nm, up to 120 km AA1419071-E6
1000BASE-BX40
bidirectional SFP
1310 nm, single fiber LC, up to 40 km AA1419076–E6
1000BASE-BX40
bidirectional SFP
1490 nm, single fiber LC, up to 40 km AA1419077–E6
100BASE-FX SFP 1310 nm, LC connector AA1419074-E6
Important:
Avaya recommends the use of Avaya branded SFP transceivers as they have been through
extensive qualification and testing. Avaya will not be responsible for issues related to non-
Avaya branded SFP transceivers.
For more information about SPF specifications, see
SFP specifications on page 43.
Installing an SFP
Install an SFP to provide an interface between the switch and the network cable.
The installation of an SFP takes about three minutes.
For translations of the following messages, see
Product safety warnings and information on
page 25.
Prerequisites
• Verify that the SFP is the correct model for your network configuration.
• Before you install the optical connector, ensure it is clean.
Danger:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a light source.
Electrostatic alert:
Risk of equipment damage
Installing an SFP
Installation — SFP and SFP+ transceivers January 2014 31