Installation Instructions

Job aid
SFPs are hot-swappable input and output enhancement components designed for use with
Avaya products to allow gigabit Ethernet ports to link with other gigabit Ethernet ports over
various media types.
The system also supports CWDM SFPs. CWDM technology consolidates multiple optical
channels on a common optical fiber. CWDM uses multiple wavelengths to expand available
bandwidth.
CWDM SFPs support high speed data communications for Metropolitan Area Networks (MAN).
The system uses a grid of eight CWDM optical wavelengths in both ring and point-to-point
configurations. All components are color-coded by wavelength.
Important:
The attainable cable length can vary depending on the quality of the fiber optic cable
used.
The following table describes the SFPs and SFP+s including the reach provided by various
SFPs. This table is informational only—not all Avaya Ethernet switching and routing products
support all the SFPs listed here.
Table 1: Compatible SFPs
Hardware
Description Part number
1000BASE-T (RJ-45) SFP Gigabit Ethernet, RJ-45 connector AA1419043-E6
1000BASE-SX (LC) DDI 850 nm, Gigabit Ethernet, duplex LC
connector
AA1419048-E6
1000BASE-LX (LC) DDI 1310 nm, Gigabit Ethernet, duplex LC
connector
AA1419049-E6
1000BASE-XD DDI 1310 nm, Gigabit Ethernet, duplex LC
connector
AA1419050-E6
1550 nm, Gigabit Ethernet, duplex LC
connector
AA1419051-E6
1000BASE-ZX DDI 1550 nm, Gigabit Ethernet, duplex LC
connector
AA1419052-E6
1000BASE-XD CWDM
(LC)
1470 nm to 1610 nm, up to 40 km AA1419053-E6 to
AA1419060–E6
1000BASE-ZX CWDM (LC) 1470 nm to 1610 nm, up to 70 km AA1419061-E6 to
AA1419068-E6
1000BASE-BX10 DDI SFP 1310 nm, single fiber LC, up to 10 km AA1419069-E6
1000BASE-BX10 DDI SFP 1490 nm, single fiber LC, up to 10 km AA1419070-E6
Small form factor pluggable transceivers
30 Installation — SFP and SFP+ transceivers January 2014
Comments? [e-mail]