Installation Instructions

Parameter Specifications
Connector Single-fiber LC
Data rate 10 Gbps
Line rate 10.3125 Gbps
Distance Up to 10 km
Single power supply 3.3 V
Maximum transmitter and dispersion penalty 3.2 dBm
Operating case temperature range –40 to +85 °C
Transmitter characteristics
Wavelength 1270 +/– 10 nm or 1330 +/– 10 nm
Launch power –8.2 to +0.5 dBm
Average launch power of OFF transmitter
P
OFF –30 dBm
Minimum extinction ratio 3.5 dB
Optical Modulation Amplitude
P
OMA –5.2 dBm
OMA-TDP, min –6.2 dBm
Receiver characteristics
Wavelength 1330 +/– 10 nm or 1270 +/– 10 nm
Average receive power –14.4 to +0.5 dBm
Maximum receiver sensitivity in OMA –12.6 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –10.3 dBm
SFP+ cable assembly specifications
This section provides cable assembly specifications for Small Form Factor Pluggable plus (SFP+)
transceivers.
SFP+ direct attach cable specifications
The following table provides a list of the supported SFP+ direct attach cables (DAC).
Cable type Cable
length
Minimum software version Part number
VSP
4000
VSP
7200
VSP
8200
VSP 8400
10GBASE-CX SFP+ 2-
pair twinaxial copper
SFP+ DAC 3
meter
3.0.0 4.2.1 4.0.0 4.2.0 AA1403019–E6
Table continues…
SFP+
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 64
Comments on this document? [e-mail]