Installation Instructions

Table 36: 10GBASE-ZR CWDM DDI SFP+ specifications
Parameter Specifications
Transmitter characteristics
Optical Data Rate (nominal) 9.95 Gbps to 10.313 Gbps
Center wavelength Nominal –6.5 nm to nominal +6.5 nm
Spectral width (RMS at –20 dB) 1 nm
RIN OMA –128 dB/Hz
Extinction ratio (minimum) 8.2 dB
Tx output: Min Max Units
P_avg –1 4 dBm
OMA +0.7 — dBm
OMA-TDP –2.3 — dBm
TDP at 1400 ps dispersion 3 dB
Optical return loss tolerance 21 dB
Receiver characteristics
Wavelength range 1460 nm to 1620 nm
Rx sensitivity: Min Max Units
back-to-back — –23 dBm
with 70 km fiber — –21 dBm
with 70 km fiber, OMA — –19.3 dBm
Receiver overload –7 dBm, P_avg
Receiver reflectance –27 dB
Receiver damage threshold +5 dBm, P_avg
10GBASE-BX SFP+ specifications
The 10GBASE-BX SFP+ provides 10 Gigabit Ethernet (GbE) service with single mode bidirectional
transceivers. One transceiver transmits at 1270 nm and receives at 1330 nm and the mating
transceiver transmits at 1330 nm and receives at 1270 nm.
Note:
Transceivers AA1403169-E6 and AA1403170-E6 must be used only as a pair.
The following table provides the wavelength and distance details for the transceiver pair:
AA1403169-E6 1270 nm Tx 1330 nm Rx up to 10 km Paired with AA1403170-E6
AA1403170-E6 1330 nm Tx 1270 nm Rx up to 10 km Paired with AA1403169-E6
The following table lists the specifications for the 10GBASE-BX SFP+ transceivers.
SFP+ specifications
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 63
Comments on this document? [e-mail]