Installation Instructions

For more information about the 10GBASE-SR/SW SFP+ transceiver (0 °C to +85 °C), including test
and measurement information, see the IEEE 802.3ae standard.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
Table 28: IEEE 802.3ae 10GBase–SR/SW SFP+ (0 °C to +85 °C) transceiver specifications
Parameter Specifications
Data rate 10 Gbps
Line rate (64B/66B code) 10.3125 gigabits per second (Gbps) ± 100 parts per million
(ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber (OM3): 2 to 300 m
• 4700 MHz-km fiber (OM4): 2 to 400 m
Link optical power budget 7.3 dB
Maximum transmitter and dispersion penalty 3.9 dB at 300 m
Operating case temperature range 0 °C to +85 °C
Transmitter characteristics
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power –7.3 to –1.0 dBm
Minimum extinction ratio 3.0 dB
Maximum optical return loss tolerance –12 dB
Receiver characteristics
Average receive power for BER 10
-12
–9.9 to –1.0 dBm
Receiver damage threshold 0dBm
Maximum receiver sensitivity in OMA –11.1 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –7.5 dBm
SFP+ specifications
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 57
Comments on this document? [e-mail]