Installation Instructions

2. Year and month of manufacture
3. Country of origin
4. Name
5. Operating wavelength
6. Part number
7. Vendor part number
8. U.S. FDA CDRH laser classification
9. U.S. FDA CDRH laser classification compliance number
10. 2D serial number barcode
11. Serial number
12. 1D serial number barcode
General QSFP+ transceiver specifications
The following table describes general QSFP+ transceiver specifications.
Table 20: General QSFP+ specifications
Parameter Specification
Dimensions (H x W x D) 8.5 x 18.35 x 72.4 mm (0.33 x
0.72 x 2.85 in.), unless otherwise
stated.
Note:
The length of the pull tab
latch varies depending on the
vendor and the body, with a
length of 125 to 132 mm
(4.92 to 5.20 in.).
Connectors 40GBASE-SR4 4x10GBASE-SR
QSFP+
MPO or MTP
40GBASE-LR4 QSFP+ Duplex LC
40GBASE-LM4 QSFP+ Duplex LC
Storage temperature –40 °F (–4 °C) to 185 °F (85 °C)
Operating temperature 23 °F (−5 °C) to 158 °F (70 °C)
Supported QSFP+ transceivers
The following section provides specifications for supported QSFP+ transceivers.
QSFP+ transceiver specifications
May 2018 Installing Transceivers and Optical Components on VOSS 55