Installation Instructions

Parameter Specifications
Connector Single-fiber LC
Data rate 10 Gbps
Line rate 10.3125 Gbps
Distance Up to 10 km
Single power supply 3.3 V
Maximum transmitter and dispersion penalty 3.2 dBm
Operating case temperature range –40 to +85 °C
Transmitter characteristics
Wavelength 1270 +/– 10 nm or 1330 +/– 10 nm
Launch power –8.2 to +0.5 dBm
Average launch power of OFF transmitter
P
OFF –30 dBm
Minimum extinction ratio 3.5 dB
Optical Modulation Amplitude
P
OMA –5.2 dBm
OMA-TDP, min –6.2 dBm
Receiver characteristics
Wavelength 1330 +/– 10 nm or 1270 +/– 10 nm
Average receive power –14.4 to +0.5 dBm
Maximum receiver sensitivity in OMA –12.6 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –10.3 dBm
10GBASE-CX specifications
The 10GBASE-CX is a 2-pair twinaxial copper cable that plugs into the SFP+ socket and connects
two 10 Gigabit ports. The reach for this cable is up to 15 m with a bit error rate (BER) that is better
than 10
-12
.
The 10GBASE-CX is a lower cost alternative to the optical SFP+ devices.
For more information about test and measurement information and additional specifications, see the
IEEE 802.3–2012 standard. For more information about the supported DACs and BOCs for your
hardware platform, see the Supported Transceiver, BOCs, and DACs chapter in this document.
SFP+ specifications
May 2018 Installing Transceivers and Optical Components on VOSS 49