Installation Instructions

Table 18: 10GBASE-LRM channel insertion loss and range
Fiber type (core diameter and OFL bandwidth) Range Maximum channel
insertion loss
62.5 μm (FDDI grade)
• 160 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
62.5 μm (ISO/IEC OM1)
• 200 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
50 μm (ISO/IEC OM2)
• 500 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
50 μm
• 400 MHz-km at 850 nm
• 400 MHz-km at 1300 nm
Up to 100 m 1.7 dB
50 μm (ISO/IEC OM3)
• 1500 MHz-km at 850 nm (includes laser launch
bandwidth)
• 500 MHz-km at 1300 nm (includes laser launch
bandwidth)
Up to 220 m 1.9 dB
The following abbreviations are used in the preceding tables:
• FDDI – Fiber Distributed Data Interface
• ISO – International Standards Organization
• IEC – International Electrotechnical Commission
• OFL – Over Filled Launch
10GBASE-BX SFP+ specifications
The 10GBASE-BX SFP+ provides 10 Gigabit Ethernet (GbE) service with single mode bidirectional
transceivers. One transceiver transmits at 1270 nm and receives at 1330 nm and the mating
transceiver transmits at 1330 nm and receives at 1270 nm.
Note:
Transceivers AA1403169-E6 and AA1403170-E6 must be used only as a pair.
The following table provides the wavelength and distance details for the transceiver pair:
AA1403169-E6 1270 nm Tx 1330 nm Rx up to 10 km Paired with AA1403170-E6
AA1403170-E6 1330 nm Tx 1270 nm Rx up to 10 km Paired with AA1403169-E6
The following table lists the specifications for the 10GBASE-BX SFP+ transceivers.
SFP+
May 2018 Installing Transceivers and Optical Components on VOSS 48