Installation Instructions

Table 9: General SFP+ specifications
Parameter Specifications
Dimensions (H x W x D) 8.5 x 13.4 x 56.4 millimeters (0.33 x 0.53 x 2.22
inches), unless otherwise stated.
Connectors LC ultra physical contact (UPC)
Storage temperature –40 to 85 ºC
Operating temperature 0 to 70 ºC for RoHS -E6 models
up to 85 ºC for high temperature models
Supported SFP+ transceivers
The following section provides specifications for the supported SFP+ transceivers.
10GBASE-T SFP+ transceiver
The 10GBASE-T SFP+ transceiver provides 10 Gigabit Ethernet connectivity using a single eight
pin RJ-45 connector.
The 10GBASE-T SFP+ only operates at 10 Gigabits per second (Gbps) speed. Operation at
10/100/1000 Megabits per second (Mbps) speeds are not supported.
The part number for this model is AA1403043-E6.
The maximum power of the SFP+ transceiver is 2.5 watts (W) at 30 meters (m).
The following table describes the 10GBASE-T SFP+ specifications.
Table 10: IEEE 802.3z 10GBASE-T SFP specifications
Parameter Specifications
Connectors RJ-45
Cabling Cat 6a/7 for 10 Gb Ethernet
Distance up to 30 m (over Cat 6a/7 cable)
10GBASE-LR/LW SFP+ specifications
The 10GBASE-LR/LW SFP+ transceiver provides 10 GbE or OC-192 service at a nominal
wavelength of 1310 nm. This SFP+ transceiver can attain link lengths of up to 10 km.
For more information about the 10GBASE-LR/LW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403011-E6.
SFP+
May 2018 Installing Transceivers and Optical Components on VOSS 40