Installation Instructions

Parameter Specification
Receiver characteristics
Maximum receiver sensitivity –19.5 dBm
Maximum input power (maximum average receive
power)
–3.0 dBm
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbps Ethernet Carrier Sense Multiple Access with Collision
Detection (CSMA-CD) connectivity using multimode optical fiber. The part number for this model is
AA1419074-E6.
This transceiver is supported in VSP 4850 SFP ports (47 and 48) and VSP 4450 SFP ports (13
through 48). The 100BASE-FX SFP is not supported in 10 Gigabit SFP+ ports.
This transceiver is supported in VSP 8400 8424GS 24–port Gigabit Ethernet SFP ESM.
The following table describes the 100BASE-FX SFP specifications.
Table 8: 100BASE-FX SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.5 W
Connectors Duplex LC
Cabling • 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance • Up to 2 km using 500 MHz-km MMF optic cable
Wavelength 1300 nm
Link optical power budget 10 dB
Transmitter characteristics
Maximum launch power –14 dBm
Minimum launch power –23.5 to –20 dBm
Receiver characteristics
Receiver sensitivity –33.5 dBm
Maximum input power –14 dBm
SFP specifications
May 2018 Installing Transceivers and Optical Components on VOSS 33