Installation Instructions

1000BASE-SX DDI SFP specifications
The 1000BASE-SX DDI SFP transceiver has a reach of up to 550 m using 50 µm MMF, and of 275
m using 62.5 µm MMF. This SFP transceiver operates at 850 nm. The part number is AA1419048-
E6.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
DDI SFP transceivers.
Table 3: 1000BASE-SX SFP DDI (550 m) specifications
Parameter Specifications
Maximum electrical power consumption 1 watt (W)
Connector Duplex LC
Cabling MMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 7.5 dB
Transmitter characteristics
Launch power –9.5 to –4.0 dBm
Receiver characteristics
Receiver sensitivity –17 dBm
Maximum receiver power 0 dBm
1000BASE-LX DDI SFP specifications
This SFP transceiver provides 1000BASE-LX Gigabit Ethernet connectivity at 1310 nanometers
(nm) using single mode or multimode optical fiber. The part number is AA1419049-E6.
Table 4: 1000BASE-LX DDI SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.0 watt (W)
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 9.5 dB
Transmitter characteristics
SFP
May 2018 Installing Transceivers and Optical Components on VOSS 30