Installation Instructions

listed in this document as supported transceivers. The switch logs the device as an
unsupported or unknown device.
• Extreme Networks recommends using the SFP transceivers documented in this document
as they have been through extensive qualification and testing. Extreme Networks is not
responsible for issues related to third party SFP transceivers.
SFP labels
The label on a typical SFP transceiver contains a serial number, a bar code, a manufacturer code,
an interface type, and a part number.
Figure 4: SFP label
General SFP specifications
The following table describes general SFP specifications.
Table 1: General SFP specifications
Parameter Description
Dimensions (H x W x D) 8.5 x 13.4 x 56.4 millimeters (0.33 x 0.53 x 2.22
inches), unless otherwise stated.
Operating temperature –5 to 85 ºC for RoHS -E6 models
Storage temperature –40 to 85 ºC
Maximum supply current 300 mA, unless otherwise stated
Maximum power consumption 1.0 W, unless otherwise stated
SFP
May 2018 Installing Transceivers and Optical Components on VOSS 28