Documentation Reference for VSP Operating System Software

Voltage:
Risk of injury or death from high voltage or electric shock
This special message indicates where an immediate hazard exists that, if not avoided, can
result in serious personal injury or death through high voltage or electric shock.
Danger:
Risk of serious personal injury or death
This special message signals where an immediate hazard exists that, if not avoided, can result
in minor or moderate personal injury.
Warning:
Risk of equipment damage
This special message warns that a potential hazard exists that, if not avoided, can result in harm
to hardware or equipment.
Caution:
Risk of system failure, service interruption, loss of data, or harm to software
This special message cautions against practices that are not safe or are potential hazards not
covered by danger or warning messages.
Electrostatic alert:
Risk of service loss from electrostatic discharge
This special message indicates the risk of electrostatic discharge from electrostatic-discharge
sensitive (ESDS) devices. It cautions the user to observe precautions for handling ESDS
devices.
Angle brackets
Angle brackets (< >) indicate that you choose the text to enter based on the description inside the
brackets. Do not type the brackets when you enter the command.
Example: If the command syntax is cfm maintenance-domain maintenance-level <0-7> ,
you can enter cfm maintenance-domain maintenance-level 4.
Braces
Braces ({ }) indicate required elements in syntax descriptions. Do not type the braces when you
enter the command.
Example: If the command syntax is ip address {A.B.C.D}, you must enter the IP address in
dotted, decimal notation.
Angle brackets
November 2017 Documentation Reference for VOSS 19