Installation Instructions
Table Of Contents
- Notices
- Safety messages
- Before you begin
- Installing the VSP 4450GSX series switches
- Installing the VSP 4000 switch on a table or shelf
- Installing the VSP 4000 switch in an equipment rack
- Installing SFP transceivers
- Removing SFP transceivers
- AC power supply specifications
- Power supply power specifications for the VSP 4450GSX series switches
- Installing the Virtual Services Platform 4000 power supply
- Connecting to AC power
- Connecting to DC power
Table 5: International power cord specifications
Country and Plug Specification Specifications Typical Plug
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on the outside of the cord
jacket to comply with the CENELEC Harmonized
Document HD-21)
• 220 or 230VAC
• 50 Hz
• Single phase
United States of America, Canada, and Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on cord jacket)
• CSA-certified (CSA label secured to the cord)
• 100 or 120VAC
• 50–60 Hz
• Single phase
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
• 240VAC
• 50 Hz
• Single phase
Australia:
• AS3112-1981 male plug
• 240VAC
• 50 Hz
• Single phase
Danger:
Using power cords with a proper grounding path
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions.
Connecting to DC power
To connect DC power to the switch, use the short power cable that is provided with the switch.
November 2017 Installation Job Aid for VSP 4450GSX Series 11