Installation Instructions
Table Of Contents
- Notices
- Safety messages
- Before you begin
- Installing the Virtual Services Platform 4000 on a table or shelf
- Installing the Virtual Services Platform 4000 in an equipment rack
- Installing SFP transceivers
- Removing SFP transceivers
- AC power supply specifications
- VSP 4000 power supply power specification
- Installing the Virtual Services Platform 4000 power supply
- Connecting to AC power
and may even prevent the system from booting up successfully. Ensure that the USB
device is inserted in the system at all times with the USB cover on.
2. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
3. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1
centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at
the back for power cord clearance.
November 2017 Installation Job Aid for VSP 4850GTS 4