Installation Instructions
Table Of Contents
- Notices
- Safety messages
- Before you begin
- Installing the VSP 4450GTX-HT-PWR+
- Installing the Virtual Services Platform 4000 on a table or shelf
- Installing the Virtual Services Platform 4000 in an equipment rack
- Installing SFP transceivers
- Removing SFP transceivers
- Power specifications for VSP 4450GTX-HT-PWR+
- Virtual Services Platform power supply power specification
- Installing the VSP 4450GTX-HT-PWR+ power supply
- Connecting to AC power
4450GTX-HT-PWR+
860W between 0°C to 50°C
400W between 50°C to 70°C
• With two operating PSUs, the maximum power
consumption is:
1660W between 0°C to 50°C
832W between 50°C to 70°C
Thermal Rating: 341.2 BTU/Hr typical and 494.8 BTU/Hr maximum
Inrush Current: 70A maximum
Turn on Condition: 1 second maximum after application of AC power
Efficiency: 70 percent minimum
Virtual Services Platform power supply
power specification
The VSP 4450GTX-HT-PWR+ supports two external field replaceable power supplies. One power
supply ships with the chassis. You can install a secondary power supply to provide redundancy, load
sharing, and to add Power over Ethernet Plus (PoE+) power budget on PWR+ models.
1000W AC power supply
VSP 4450GTX-HT-PWR+ supports dual 54V 1000W Power over Ethernet Plus (PoE+) AC power
supplies.
Important:
Ensure that you use only 1000W power supplies (both primary and secondary) on VSP
4450GTX-HT-PWR+ models.
November 2017 Installation Job Aid for VSP 4450GTX-HT-PWR+ 8