Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Preface
- Chapter 2: New in this document
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the VSP 4450GTX-HT-PWR+
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Environmental requirements
- Airflow direction
- Package contents
- Installing the Virtual Services Platform 4000 on a table or shelf
- Installing the Virtual Services Platform 4000 in an equipment rack
- Cable requirements for the Virtual Services Platform 4000
- Installation and removal of Small Form Factor Pluggable (SFP) transceivers
- RJ45 connector pin assignments
- Console port pin assignments
- Installing the Virtual Services Platform 4000 power supply
- Connect AC power
- LED state definitions
- Viewing hardware information
- Chapter 6: Translations of safety messages
Warning:
Disconnecting the AC power cord is the only way to turn off AC power to this device. Always
connect the AC power cord in a quickly and safely accessible location in case of an emergency.
Important:
Warnung:
Das Gerät kann nur durch Ziehen des Netzsteckers ausgeschaltet werden. Schließen Sie das
Netzkabel an einer Steckdose an, die in Notfällen schnell und sicher zugänglich ist.
Important:
Avertissement:
Pour mettre le module hors tension, vous devez impérativement déconnecter le cordon
d'alimentation. En outre, vous devez dégager un espace minimal dans la zone de câblage pour
pouvoir y accéder facilement en cas d'urgence.
Important:
Advertencia:
Para apagar el dispositivo debe desenchufar el cable. Conecte siempre el cable de
alimentación a una toma segura y de fácil acceso por si se produjera alguna situación de
emergencia.
Important:
Avviso:
L'unico modo per disattivare questo dispositivo consiste nello scollegare il cavo di
alimentazione. Collegare sempre il cavo di alimentazione ad una presa che sia facilmente e
rapidamente accessibile in caso di emergenza.
Danger:
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions.
Important:
Vorsicht:
August 2018 Installing the Virtual Services Platform 4450GTX-HT-PWR+ 41










