Installation Instructions

Table 11: VSP 4450GTX-HT-PWR+ model with 1 PSU
0°C to 50°C 50°C to 70°C
PoE support on 48 ports 23 ports
PoE+ support on 26 ports 13 ports
Table 12: VSP 4450GTX-HT-PWR+ model with 2 PSUs
0°C to 50°C 50°C to 70°C
PoE support on 48 ports 48 ports
PoE+ support on 48 ports 26 ports
• VSP 4450GTX-HT-PWR+ can support 802.3af 17.8W or 32.4W on each port with one power
supply installed. You can add a second power supply for redundancy.
AC power supply specifications
The following table describes the regulatory AC power specifications for the VSP 4450GTX-HT-
PWR+ switch. The regulatory power specifications are based on the maximum rated capacity of the
power supplies and are not based on typical power consumption which is lower.
Table 13: AC power specifications
4450GTX-HT-PWR+
Input Current: 16.66A/8.33A
Input Voltage (rms): 100 to 240VAC at 50 to 60 Hz
Power Consumption: • Without PoE+
- Typical: 100W
- Maximum: 145W
• With PoE+
- Typical power utilization depends on the number
of ports using PoE+.
- Maximum: 553.4W
Thermal Rating: 341.2 BTU/Hr typical and 494.8 BTU/Hr maximum
Inrush Current: 70A maximum
Turn on Condition: 1 second maximum after application of AC power
Efficiency: 70 percent minimum
Connect AC power
This section explains power cord specifications and how to connect AC power.
Connect AC power
August 2018 Installing the Virtual Services Platform 4450GTX-HT-PWR+ 29