Installation Instructions

3. Rubber footpads
4. Documentation that includes the following:
a. Locating the latest software and product release notes for Virtual Services Platform
4000 Series
b. Virtual Services Platform 4000 Series Regulatory Guide
c. Virtual Services Platform 4450GTX-HT-PWR+ Quick Install Guide
d. The China RoHS paper
5.
Note:
Power cords must be ordered separately. Ensure you order the correct power code for
your region. For more information, see Power cord types and order codes on page 11.
Installing the Virtual Services Platform 4000 on a table or
shelf
You can install a single VSP 4000 switch on any flat surface. The surface must support the
combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
To install a VSP 4000 on a table or shelf, perform this procedure.
1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
2. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1
centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at
the back for power cord clearance.
Installing the Virtual Services Platform 4000 on a table or shelf
August 2018 Installing the Virtual Services Platform 4450GTX-HT-PWR+ 21