Installation Instructions
Table Of Contents
- Starting the ONA
- Connecting the ONA to the network
- Connecting your device to the ONA
- Setting the ONA to factory defaults
- ONA Operational Modes
- Modifying Manual Configuration parameters
- System Status LED
- Power LED
- 10/100/1000 RJ-45 Port LEDs
- Restarting the ONA
- Running diagnostics on the ONA
- Upgrading a standalone ONA using the Manual Configuration menu
- Upgrading a deployed ONA
5. On the PC, use a browser to connect to the ONA configuration menu with the address http://
192.168.100.1.
6. Click Edit Parameters.
7. Modify the configuration parameters that you want to change.
8. Click "Save" to store the parameters in persistent memory.
9. Click "Return to Configuration page."
10. Click "Reboot into Operational Mode."
11. Disconnect the PC.
System Status LED
The System Status LED is visible from either side of the unit.
Table 1: System Status LED
Color and Status Description
Amber (slow blinking) Booting OS (both modes)
Amber (steady) Manual Configuration menu running (both modes)
Green (slow blinking) Application starting (both modes)
Green (fast blinking) IP address is acquired by DHCP (both modes)
Green (steady) Application initialization completed. Connectivity is established and
operating (both modes)
Table continues…
December 2017 Open Networking Adapter 1101GT Installation Job Aid 15