Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Preface
- Chapter 2: New in this document
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the VSP 4450GSX-PWR+ series
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Environmental requirements
- Airflow direction
- Package contents
- Installing the Virtual Services Platform 4000 on a table or shelf
- Installing the Virtual Services Platform 4000 in an equipment rack
- Cable requirements for the Virtual Services Platform 4000
- Installation and removal of Small Form Factor Pluggable (SFP) transceivers
- RJ45 connector pin assignments
- Console port pin assignments
- Installing the Virtual Services Platform 4000 power supply
- Connect AC power
- LED state definitions
- Viewing hardware information
- Chapter 6: Translations of safety messages
Table 4: Power cords for use with C14 or C16 power supply side connector
Order Code Description Region
AA0020071-E6 Power cord 2.5 m IEC C15 to BS1363 United Kingdom
AA0020072-E6 Power cord 2.5 m IEC C15 to CEE 7/7 European Union
AA0020073-E6 Power cord 2.5 m IEC C15 to JIS 8303 Japan
AA0020074-E6 POWER CORD 2.0M IEC C15 TO NEMA 5-15P United States/Canada
AA0020075-E6 Power cord 2.5 m IEC C15 to AS 3112 Australia
AA0020097-E6 Power cord 2.5 m IEC C15 to SANS 164-1 PLUG South Africa
AA0020100-E6 Power cord 2.5 m IEC C15 to NBR 14136 Brazil
AA0020103-E6 Power cord 2.5 m IEC C15 to SEV 1011 Switzerland
AA0020105-E6 Power cord 2.5 m IEC C15 to CEI 23-16 Italy
AA0020106-E6 Power cord 2.5 m IEC C15 to SI-32 Israel
AA0020108-E6 Power cord 2.5M IEC C15 TO NEMA L6-15P Twist Lock USA and Canada
AA0020109-E6 Power cord 2.5M IEC C15 TO BS-546 India
AA0020110-E6 Power cord 2.5M IEC C15 TO IRAM 2073 Argentina
Supported optical devices
Use optical devices to achieve high bit-rate communications and long transmission distances. The
following section describes the supported optical devices on the VSP 4000 system.
Important:
Extreme Networks recommends using SFP and SFP+ transceivers as they undergo extensive
qualification and testing. Extreme Networks will not be responsible for issues related to third
party transceivers.
Small Form Factor Pluggable (SFP) transceivers
SFPs are hot-swappable input and output enhancement components designed to allow gigabit
Ethernet ports to link with other gigabit Ethernet ports over various media types.
You can use various SFP (1Gb/s) and SFP+ (10Gb/s) to attain different line rates and reaches. The
following table describes the SFPs including the reach provided by various SFPs.
Important:
The attainable cable length can vary depending on the quality of the fiber optic cable used.
Small Form Factor Pluggable plus (SFP+) transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections. All SFP+ transceivers use Lucent connectors (LC) to provide precision keying
and low interface losses.
Hardware models
August 2018 Installing the Virtual Services Platform 4450GSX-PWR+ 12