Installation Instructions

Platform power supplies
The VSP 4450GSX series supports both AC and DC power supplies. One power supply is installed
in the system.
You can install a redundant power supply to support additional power requirements or to provide
power redundancy.
The following table describes the VSP 4000 compatible AC and DC power supplies and their part
numbers (order codes). All the power supplies are EUED RoHS 5/6 compliant.
Note:
The 1000W AC power supply uses the IEC 60320 C16 AC power cord connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
Note:
Power cords must be ordered separately. Ensure you order the correct power code for your
region. For more information, see
Power cord types and order codes on page 11.
Table 2: Power supply order codes
VSP 4000 PSU Usage Part number
(order code)
1000W AC POE+
power supply
For use in VSP 4450GSX-PWR+ model. AL1905A21-E6
300W DC power
supply
For use in the VSP 4850GTS-DC, VSP 4450GSX-DC,
ERS5698TFD, 5650TD, and 5632FD.
DC connector included.
AL1905005-E5
Power cord types and order codes
To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table.
Table 3: Power cords for power distribution units
Order Code Length Power supply side
connector
Power source
side connector
Safety Approval
700512240 3 m C15 C14 USA
700512242 3 m C15 C14 International except
Japan and Taiwan
Platform power supplies
August 2018 Installing the Virtual Services Platform 4450GSX-PWR+ 11