Installation Instructions

Chapter 3: Hardware models
The following table describes the VSP 4450GSX series hardware.
Table 1: Hardware
VSP 4000 model Description Part number
VSP 4450GSX-PWR+ • 12 10/100/1000 Mbps RJ45 ports with
802.3at PoE+
• 36 100/1000 Mbps SFP ports
• 2 1/10G SFP+ ports with MACsec capable
PHY
• 1 (of 2) field-replaceable 1000W PSUs
supplied with the chassis
EC4400A05-E6
VSP 4450GSX-DC • 12 10/100/1000 Mbps TX RJ45 ports
• 36 100/1000 Mbps SFP ports
• 2 1/10G SFP+ ports with MACsec capable
PHY
• 1 (of 2) field replaceable 300W DC PSUs
supplied with the chassis
EC4400004-E6
Power cords must be ordered separately. Ensure you order the correct power code for your region. For more
information, see Power cord types and order codes on page 11.
Management port
Extreme Networks Virtual Services Platform 4000 Series requires one port to be configured as the
management port. This port separates user traffic from management traffic in highly sensitive
environments, such as brokerages and insurance agencies. By using this dedicated network to
manage the switch, and by configuring access policies (if you enable routing), you can manage the
switch in a secure fashion. You can also use terminal servers to access the console port on the CP
module.
If you must access the switch, it is recommended that you use the console port. The switch is
always reachable, even if an issue occurs with the in-band network management interface.
August 2018 Installing the Virtual Services Platform 4450GSX-PWR+ 10