Installation Instructions

Fiber type (core diameter and OFL bandwidth) Range Maximum channel
insertion loss
50 μm
• 400 MHz-km at 850 nm
• 400 MHz-km at 1300 nm
Up to 100 m 1.7 dB
50 μm (ISO/IEC OM3)
• 1500 MHz-km at 850 nm (includes laser launch
bandwidth)
• 500 MHz-km at 1300 nm (includes laser launch
bandwidth)
Up to 220 m 1.9 dB
The following abbreviations are used in the preceding tables:
• FDDI – Fiber Distributed Data Interface
• ISO – International Standards Organization
• IEC – International Electrotechnical Commission
• OFL – Over Filled Launch
10GBASE-CX specifications
The 10GBASE-CX is a 4-pair twinaxial copper cable that plugs into the SFP+ socket and connects
two 10 Gb ports. The reach for this cable is up to 15 m with a bit error rate (BER) better than 10
-12
.
The signaling speed for each lane is 3.125 GBd ± 100 ppm. The 10GBASE-CX is a lower cost
alternative to the optical SFP+ devices.
For more information about the 10GBASE-CX, including test and measurement information and
more specifications, see the IEEE 802.3ak standard. The following table identifies the part numbers
for specific cable lengths.
Table 26: 10GBASE-CX cables
Cable length
Part number
3 meter AA1403019-E6
5 meter AA1403020-E6
10 meter AA1403018-E6
10GBASE-ER CWDM SFP+ specifications
The following table lists the part numbers for the 10GBASE-ER CWDM SFP+ transceivers with
corresponding wavelengths.
SFP+
46 Installing Transceivers and Optical components on Avaya VSP 4000 February 2015
Comments? [e-mail]