Installation Instructions

Parameter Specifications
Line rate (64B/66B code) 10.3125 Gbps ± 100 ppm
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 220 m
Link optical power budget 1.7 to 1.9 dB
Maximum transmitter waveform and dispersion
penalty (TWDP)
4.7 dB
Transmitter characteristics
Average launch power –6.5 to 0.5 dBm
Peak launch power 3 dBm
Root-mean-square spectral width 2.4 to 4 nm
Launch power in OMA –4.5 to 1.5 dBm
Minimum extinction ratio 3.5 dB
Optical return loss tolerance (minimum) –20 dB
Receiver characteristics
Receiver damage threshold 1.5 dBm
Receiver reflectance (maximum) –12 dB
For more information about the conditions used for the stressed receiver tests, and other
information, see the IEEE 802.3–2012 standard.
The following table (from IEEE 802.3–2012) describes the maximum channel insertion loss. The
channel insertion loss includes both attenuation and connector loss (1.5 dB); therefore the maximum
fiber attenuation is 0.2 to 0.4 dB.
Table 25: 10GBASE-LRM channel insertion loss and range
Fiber type (core diameter and OFL bandwidth) Range Maximum channel
insertion loss
62.5 μm (FDDI grade)
• 160 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
62.5 μm (ISO/IEC OM1)
• 200 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
50 μm (ISO/IEC OM2)
• 500 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
Table continues…
SFP+ specifications
February 2015 Installing Transceivers and Optical components on Avaya VSP 4000 45
Comments? [e-mail]