Installation Instructions

The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1550 nm.
Table 23: 10GBASE-ZR/ZW SFP+ specifications
Parameter Specifications
Line rate (nominal) 10GBASE-ZR 10.3125 Gbps ±100 ppm (10 GbE)
Distance Up to 70 km *
Link optical power budget 24 dB
Dispersion power penalty 3.0 dB at 70 km (G.652 fiber)
Minimum attenuation between transmit and receive
ports
11 dB
Transmitter characteristics
Center wavelength range 1530 to 1565 nm, nominal 1550 nm
Average launch power 0 to 4.0 dBm
Optical modulation amplitude (minimum) –1.7 dBm
Extinction ratio (ER) (minimum) 8.2 dB
Maximum transmitter reflectance –12 dB
Receiver characteristics
Wavelength range 1280 to 1575 nm. Sensitivity specified for 1530 to
1565 nm.
Maximum receiver sensitivity (average power) –24 dBm
Maximum receiver (average) power, BER 10
-12
–7.0 dBm
Receiver damage threshold (average power) +5.0 dBm
Receiver reflectance (maximum) –27 dB
* Achievable link distance is primarily dependent on cable plant insertion loss. 70 km is not possible
in some situations.
10GBASE-LRM SFP+ specifications
The 10GBASE-LRM SFP+ transceiver provides 10 GbE service at a wavelength of 1310 nm. This
SFP+ transceiver can attain a reach of up to 220 m on 62.5 μm multimode fiber.
The following table lists the transmitter and receiver specifications for the 10GBASE-LRM SFP+
transceiver. These parameters meet the IEEE 802.3aq-2006 standard. The part number of this SFP
+ transceiver is AA1403017-E6.
In this table, the OMA, average launch power, and peak power specifications apply at TP2, after
accounting for patch cord loss.
Table 24: IEEE 802.3aq 10GBASE-LRM SFP+ transceiver specifications
Parameter Specifications
Data rate 10 Gbps
Table continues…
SFP+
44 Installing Transceivers and Optical components on Avaya VSP 4000 February 2015
Comments? [e-mail]