Installation Instructions

Table 22: IEEE 802.3ae 10GBase–SR/SW SFP+ (0 °C to +85 °C) transceiver specifications
Parameter Specifications
Data rate 10 Gbps
Line rate (64B/66B code) 10.3125 gigabits per second (Gbps) ± 100 parts per million
(ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber (OM3): 2 to 300 m
• 4700 MHz-km fiber (OM4): 2 to 400 m
Link optical power budget 7.3 dB
Maximum transmitter and dispersion penalty 3.9 dB at 300 m
Operating case temperature range 0 °C to +85 °C
Transmitter characteristics
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power –7.3 to –1.0 dBm
Minimum extinction ratio 3.0 dB
Maximum optical return loss tolerance –12 dB
Receiver characteristics
Average receive power for BER 10
-12
–9.9 to –1.0 dBm
Receiver damage threshold 0dBm
Maximum receiver sensitivity in OMA –11.1 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –7.5 dBm
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403016-E6.
Warning:
Risk of BER increase
For proper SFP+ transceiver operation, ensure that at least 11 dB of attenuation is present
between the transmit and receive ports.
SFP+ specifications
February 2015 Installing Transceivers and Optical components on Avaya VSP 4000 43
Comments? [e-mail]