Installation Instructions

Parameter Specifications
Maximum average launch power of OFF transmitter –30 dBm
Minimum extinction ratio 3.0 dB
Maximum RIN
12
OMA –128 dB/Hz
Maximum optical return loss tolerance –21 dB
Receiver characteristics
Average receive power for BER 10
-12
– 15.8 dBm to –1.0 dBm
Maximum receive power for damage 4.0 dBm
Maximum receiver sensitivity in OMA –14.1 dBm
Maximum receiver reflectance –26 dB
Stressed receiver sensitivity in OMA –11.3 dBm
Receive electrical 3 dB upper cutoff frequency
(maximum)
12.3 GHz
The following list shows examples of an OFF transmitter:
• No power supplied to the PDM.
• Laser shutdown for safety conditions.
• Activation of PMD_global_transmit_disable or other optional transmitter shutdown
condition.
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SW SFP+ transceivers provides 10 GbE service at 850 nm.
For more information about the 10GBASE-SR/SW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
The following table lists the specifications for the 10GBASE-SR/SW SFP+ transceivers. The part
number of this SFP+ transceiver is AA1403015-E6.
Table 21: IEEE 802.3ae 10GBASE-SR/SW SFP+ transceiver specifications
Parameter Specifications
Data rate 10 gigabits per second (Gbps)
Line rate (64B/66B code) 10.3125 Gbps ± 100 parts per million (ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Table continues…
SFP+ specifications
February 2015 Installing Transceivers and Optical components on Avaya VSP 4000 41
Comments? [e-mail]