Installation Instructions

Parameter Specifications
Minimum optical modulation amplitude –5.2 dBm
Minimum extinction ratio 3.5 dB
Maximum optical return loss tolerance –12 dB
Maximum transmitter reflectance –12 dB
Receiver characteristics
Line rate (nominal) 10GBASE-LR 10.3125 Gbps ± 100 ppm (10 GbE)
Average receive power for BER 10
-12
–14.4 dBm to 0.5 dBm
Maximum average receive power for damage 1.5 dBm
Maximum receiver sensitivity in OMA –12.6 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –10.3 dBm
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown for
safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shutdown condition.
10GBASE-ER/EW SFP+ specifications
The 10GBASE-ER/EW SFP+ transceiver provides a reach of up to 40 km at a wavelength of 1550
nm.
For more information about the 10GBASE-ER/EW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403013-E6.
Table 20: IEEE 802.3ae 10GBASE-ER/EW SFP+ transceiver specifications
Parameter
Specifications
Line rate (nominal) 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm (10 GbE)
Center wavelength range 1530 to 1565 nm; nominal 1550 nm
Distance Up to 40 km
Link optical power budget 15 dB
Transmitter and dispersion power penalty 3.0 dB at 40 km
Transmitter characteristics
Launch power –4.7 to 4.0 dBm
Minimum side mode suppression ratio 30 dB
Minimum launch power in OMA minus transmission
and dispersion penalty (TDP)
–2.1 dBm
Minimum optical modulation amplitude –1.7 dBm
Table continues…
SFP+
40 Installing Transceivers and Optical components on Avaya VSP 4000 February 2015
Comments? [e-mail]