Installation Instructions

Job aid
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections.
All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision keying and low
interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 16: Compatible SFP+s
Hardware Description Part number
10GBASE-LR/LW SFP+ 1310 nm SMF with a range up to 10 km AA1403011-E6
10GBASE–LR SFP+ (–5 °C to
+85 °C)
1310 nm SMF with a range up to 10 km AA1403011-E6HT
10GBASE-ER/EW SFP+ 1550 nm SMF with a range up to 40 km AA1403013-E6
10GBASE-SR/SW SFP+ 850 nm with a range up to 400 m (OM4) AA1403015-E6
10GBASE–SR SFP+ (0 °C to
+85 °C)
850 nm with a range up to 400 m (OM4) AA1403015-E6HT
10GBASE ZR/ZW SFP+ 1550 nm 70km SMF AA1403016-E6
10GBASE-ER/ZR CWDM SFP+ 1471 to 1611 nm with a range up to 70 km AA1403153-E6 to
AA1403168-E6
10GBASE-LRM SFP+ 220 m, 1260 to 1355 nm; 1310 nm nominal
MMF
AA1403017-E6
10GBase-CX 4-pair twinaxial copper cable that plugs into
the SFP+ socket and connects two 10 Gb
ports. The supported lengths are 3 m, 5 m,
and 10 m.
AA1403018-E6 to
AA1403020-E6
Important:
Avaya recommends the use of Avaya branded SFP+ transceivers as they have been through
extensive qualification and testing. Avaya will not be responsible for issues related to non-Avaya
branded SFP+ transceivers.
For more information about SFP+ specifications, see SFP+ specifications on page 37.
Installing an SFP+
Install an SFP+ transceiver to provide a 10–gigabit Ethernet interface between the device and other
network devices.
SFP+
34 Installing Transceivers and Optical components on Avaya VSP 4000 February 2015
Comments? [e-mail]