Installation Instructions

Parameter Specifications
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Distance Up to 40 km with SMF
Wavelength 1310 nm and 1490 nm
Link optical power budget 20.0 dB
Maximum transmitter and dispersion power penalty 3.3 dB
Transmitter characteristics
Maximum launch power 3.0 dBm
Minimum launch power –3.0 dBm
Receiver characteristics
Maximum receiver sensitivity –23 dBm
Maximum input power (maximum average receive
power)
–3.0 dBm
1000BASE-EX DDI SFP specifications
The following table describes the 1000BASE-EX DDI SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 120 km. The part number is AA1419071-E6.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 14 dB of attenuation exists
between the transmit and receive ports.
To attain the BER of 10
-12
, the minimum attenuation between the transmit and receive ports is
15 dB.
Table 14: 1000BASE-EX DDI SFP transceiver specifications
Parameter Specification
Maximum electrical power consumption 1.2 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 30 dB
Maximum dispersion power penalty 2.0 dB at 120 km
Minimum attenuation between transmit and receive
ports
14 dB
Transmitter characteristics
Table continues…
SFP specifications
February 2015 Installing Transceivers and Optical components on Avaya VSP 4000 31
Comments? [e-mail]