Installation Instructions

Parameter Specification
Maximum dispersion power penalty 2 dB at 40 km
Minimum attenuation between transmit and receive
ports
3 dB
Transmitter characteristics
Launch power –2.0 to 3.0 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power 0 dBm
1000BASE-ZX DDI 1550 nm SFP specifications
The following table describes the 1000BASE-ZX CWDM SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 70 km. The part number is AA1419052-E6.
This transceiver has been discontinued and is no longer available for purchase. Avaya recommends
AA1419065-E6 as a replacement.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 5 dB of attenuation exists
between the transmit and receive ports.
Table 8: 1000BASE-ZX DDI 1550 nm SFP transceiver specifications
Parameter Specification
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 24 dB
Maximum dispersion power penalty 2 dB at 70 km
Minimum attenuation between transmit and receive
ports
5 dB
Transmitter characteristics
Launch power 0 to 5 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power –0 dBm
SFP specifications
February 2015 Installing Transceivers and Optical components on Avaya VSP 4000 27
Comments? [e-mail]