Installation Instructions

Parameter Specification
Transmitter characteristics
Line rate 10 Gbps
Signaling rate, each lane 10GBase 10.3125 Gbps
Data rate, total 40GBase 41.25 Gbps
Lane wavelength ranges 1264.5 nanometers to 1277.5 nanometers
1284.5 nanometers to 1297.5 nanometers
1304.5 nanometers to 1317.5 nanometers
1324.5 nanometers to 1337.5 nanometers
Total average optical power 8.3 dBm
Minimum average optical power, each lane at 10.3125
Gbps.
–7 dBm
Maximum average optical power, each lane at 10.3125
Gbps.
2.3 dBm
Difference in optical power between any two lanes 6.5 dB
Minimum side mode suppression ratio 30 dB
Minimum optical modulation amplitude –4 dBm
Maximum optical modulation amplitude 3.5 dBm
Maximum average optical power of OFF transmitter,
each lane
–30 dBm
Minimum extinction ratio at 10.3125 Gbps 3.5 dB
RIN
20
OMA (maximum) –128 dB/Hz
Maximum optical return loss tolerance 20 dB
Receiver characteristics
Line rate 10 Gbps
Signaling rate, each lane 10GBase 10.3125 Gbps
Data rate, total 40GBase 41.25 Gbps
Lane wavelength ranges 1264.5 nanometers to 1277.5 nanometers
1284.5 nanometers to 1297.5 nanometers
1304.5 nanometers to 1317.5 nanometers
1324.5 nanometers to 1337.5 nanometers
Average receive power, each lane at 10.3125 Gbps. –13.7 to 2.3 dBm
Maximum receiver power, each lane in OMA. 3.5 dBm
Maximum receiver sensitivity in OMA, each lane at
10.3125 Gbps.
–11.5 dBm
Maximum receiver reflectance –26 dBm
Table continues…
QSFP+ transceiver specifications
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 75
Comments on this document? [e-mail]