Installation Instructions

QSFP+ transceiver labels
A label can be located on either the top or bottom of the typical Avaya QSFP+ transceiver. The
following figure shows an example label.
Avaya uses alternate labels, depending on the size of the device and space available for label
information.
Figure 5: 40GBASE–SR4 QSFP+ transceiver label example
The following table identifies the numbered items in the preceding figure.
Table 37: Figure notes for a 40GBASE–SR4 QSFP+ transceiver label
1. Avaya logo
2. Optical safety certification logos
3. Year and month of manufacture
4. Country of origin
5. Name
6. Operating wavelength
7. Avaya PEC
8. Vendor part number
9. U.S. FDA CDRH laser classification
10. U.S. FDA CDRH laser classification compliance number
11. 2D serial number barcode
12. Serial number
13. 1D serial number barcode
General QSFP+ transceiver specifications
The following table describes general QSFP+ transceiver specifications.
QSFP+
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 72
Comments on this document? [e-mail]