Installation Instructions

10GBASE-BX SFP+ specifications
The 10GBASE-BX SFP+ provides 10 Gigabit Ethernet (GbE) service with single mode bidirectional
transceivers. One transceiver transmits at 1270 nm and receives at 1330 nm and the mating
transceiver transmits at 1330 nm and receives at 1270 nm.
Note:
Transceivers AA1403169-E6 and AA1403170-E6 must be used only as a pair.
The following table provides the wavelength and distance details for the transceiver pair:
AA1403169-E6 1270 nm Tx 1330 nm Rx up to 10 km Paired with AA1403170-E6
AA1403170-E6 1330 nm Tx 1270 nm Rx up to 10 km Paired with AA1403169-E6
The following table lists the specifications for the 10GBASE-BX SFP+ transceivers.
Parameter Specifications
Connector Single-fiber LC
Data rate 10 Gbps
Line rate 10.3125 Gbps
Distance Up to 10 km
Single power supply 3.3 V
Maximum transmitter and dispersion penalty 3.2 dBm
Operating case temperature range –40 to +85 °C
Transmitter characteristics
Wavelength 1270 +/– 10 nm or 1330 +/– 10 nm
Launch power –8.2 to +0.5 dBm
Average launch power of OFF transmitter
P
OFF –30 dBm
Minimum extinction ratio 3.5 dB
Optical Modulation Amplitude
P
OMA –5.2 dBm
OMA-TDP, min –6.2 dBm
Receiver characteristics
Wavelength 1330 +/– 10 nm or 1270 +/– 10 nm
Average receive power –14.4 to +0.5 dBm
Maximum receiver sensitivity in OMA –12.6 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –10.3 dBm
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 64
Comments on this document? [e-mail]