Installation Instructions

Table 33: 10GBASE-LRM channel insertion loss and range
Fiber type (core diameter and OFL bandwidth) Range Maximum channel
insertion loss
62.5 μm (FDDI grade)
• 160 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
62.5 μm (ISO/IEC OM1)
• 200 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
50 μm (ISO/IEC OM2)
• 500 MHz-km at 850 nm
• 500 MHz-km at 1300 nm
Up to 220 m 1.9 dB
50 μm
• 400 MHz-km at 850 nm
• 400 MHz-km at 1300 nm
Up to 100 m 1.7 dB
50 μm (ISO/IEC OM3)
• 1500 MHz-km at 850 nm (includes laser launch
bandwidth)
• 500 MHz-km at 1300 nm (includes laser launch
bandwidth)
Up to 220 m 1.9 dB
The following abbreviations are used in the preceding tables:
• FDDI – Fiber Distributed Data Interface
• ISO – International Standards Organization
• IEC – International Electrotechnical Commission
• OFL – Over Filled Launch
10GBASE-ZR CWDM DDI SFP+ specifications
The following table lists the part numbers for the 10GBASE-ZR CWDM DDI SFP+ transceivers with
corresponding wavelengths.
The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1551 nm.
Table 34: Part number and center wavelength assignment
Part number Center wavelength
assignment
Reach Minimum insertion loss
Tx and Rx
AA1403161-E6 1471 nm 70 km 10 dB
Table continues…
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 62
Comments on this document? [e-mail]