Installation Instructions

Parameter Specifications
Maximum receiver reflectance –26 dB
Stressed receiver sensitivity in OMA –11.3 dBm
Receive electrical 3 dB upper cutoff frequency
(maximum)
12.3 GHz
The following list shows examples of an OFF transmitter:
• No power supplied to the PDM.
• Laser shutdown for safety conditions.
• Activation of PMD_global_transmit_disable or other optional transmitter shutdown
condition.
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SW SFP+ transceivers provides 10 GbE service at 850 nm.
For more information about the 10GBASE-SR/SW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
The following table lists the specifications for the 10GBASE-SR/SW SFP+ transceivers. The part
number of this SFP+ transceiver is AA1403015-E6.
Table 26: IEEE 802.3ae 10GBASE-SR/SW SFP+ transceiver specifications
Parameter Specifications
Data rate 10 gigabits per second (Gbps)
Line rate (64B/66B code) 10.3125 Gbps ± 100 parts per million (ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
• 4700 MHz-km fiber (OM4): 2 to 400 m
Table continues…
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 56
Comments on this document? [e-mail]