Installation Instructions

• Avaya recommends the use of Avaya branded SFP and SFP+ transceivers as they have
been through extensive qualification and testing. Avaya will not be responsible for issues
related to non-Avaya branded SFP and SFP+ transceivers.
SFP+ labels
The typical Avaya SFP+ transceiver has a label on the top and bottom or side of the transceiver.
The following figures show example labels. Avaya does use alternate labels, depending on the size
of the device and space available for label information. Some devices do not have a CLEI code or
label.
Figure 3: SFP+ top label
Figure 4: SFP+ bottom label
General SFP+ specifications
The following table describes general SFP+ specifications.
Table 22: General SFP+ specifications
Parameter
Specifications
Dimensions (H x W x D) 8.5 x 13.4 x 56.4 millimeters (0.33 x 0.53 x 2.22
inches), unless otherwise stated.
Table continues…
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 52
Comments on this document? [e-mail]