Installation Instructions

Table 12: 1000BASE-XD DDI 1550 nm SFP transceiver specifications
Parameter Specification
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 22 dB
Maximum dispersion power penalty 2 dB at 40 km
Minimum attenuation between transmit and receive
ports
3 dB
Transmitter characteristics
Launch power –2.0 to 3.0 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power 0 dBm
1000BASE-ZX DDI 1550 nm SFP specifications
The following table describes the 1000BASE-ZX CWDM SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 70 km. The part number is AA1419052-E6*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 5 dB of attenuation exists
between the transmit and receive ports.
Table 13: 1000BASE-ZX DDI 1550 nm SFP transceiver specifications
Parameter Specification
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 24 dB
Table continues…
SFP
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 38
Comments on this document? [e-mail]