Installation Instructions

Parameter Specifications
Transmitter characteristics
Launch power –9.5 to –3.0 dBm
Receiver characteristics
Receiver sensitivity –19.0 dBm
Maximum receiver power –3.0 dBm
1000BASE-XD DDI 1310 nm SFP specifications
The following table describes the 1000BASE-XD DDI SFP. This SFP operates at 1310 nm and has
a reach of up to 40 km. The part number is AA1419050-E6*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see
Locating end of sale notices on page 11.
Table 11: 1000BASE-XD DDI 1310 nm SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B) code 1.25 Gbps
Link optical power budget 18 dB
Transmitter characteristics
Launch power –4.5 to 0 dBm
Receiver characteristics
Receiver sensitivity –22.5 dBm
Maximum receiver power 0 dBm
1000BASE-XD DDI 1550 nm SFP specifications
The following table describes the 1000BASE-XD DDI SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 40 km. The part number is AA1419051-E6*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 3 dB of attenuation exists
between the transmit and receive ports.
SFP specifications
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 37
Comments on this document? [e-mail]