Installation Instructions

* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
Important:
For the 70 km CWDM SFP transceivers, a minimum attenuation of 10 dB must be present
between the transmitter and receiver.
Table 7: 1000BASE-ZX CWDM (70 km) SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Operating temperature range 0 to 60°C
Link optical power budget 20 dB
Transmitter characteristics
Launch power –3.0 to 2.0 dBm
Receiver characteristics
Receiver sensitivity –23 dBm
Maximum input power –3.0 dBm
1000BASE-T SFP specifications
The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector.
The 1000BASE-T SFP only operates at 1 gigabits per second (Gbps) speed. Operation at 100 or 10
megabits per second (Mbps) speeds are not supported.
The part number for this model is AA1419043-E6.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 8: IEEE 802.3z 1000BASE-T SFP specifications
Parameter Specifications
Standards IEEE 802.3z, IEEE 802.3ab
Connectors RJ-45
Cabling CAT5E or better UTP
Distance Up to 100 m
SFP specifications
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 35
Comments on this document? [e-mail]