Installation Instructions

Table 4: IEEE 802.3z 1000BASE-SX (MT-RJ) SFP specifications
Parameter Specifications
Connectors Duplex MT-RJ
Cabling • 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance • up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
Wavelength 850 nm
Link optical power budget 7.0 dB
Transmitter characteristics
Launch power –10 to –4.0 dBm
Receiver characteristics
Receiver sensitivity –17 dBm
Maximum input power 0 dBm
1000BASE-LX SFP specifications
The 1000BASE-LX SFP transceiver provides 1000BASE-LX gigabit Ethernet connectivity at 1310
nanometers (nm) using single mode or multimode optical fiber. The 1000BASE-LX SFP transceiver
supports only full-duplex operation. The part number is AA1419015-E5*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-LX
SFP transceiver.
Table 5: IEEE 802.3z 1000BASE-LX SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Wavelength 1310 nm
Link optical power budget 10.5 dB
Transmitter characteristics
Table continues…
SFP specifications
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 33
Comments on this document? [e-mail]