Installation Instructions

Model Description Minimum software version Part number
VSP
4000
VSP
7200
VSP
8200
VSP
8400
Important:
AA1419065–E6 remains
available for purchase.
1000BASE-
BX10 DDI SFP
1310 nm (tx)
and 1490 nm
(rx)
gigabit
Ethernet,
single-fiber LC
connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419069-E6 (10 km at 1310 nm )
and mating pair AA1419070-E6 (10
km at 1490 nm)
1000BASE-EX
DDI SFP
1550 nm,
gigabit
Ethernet,
duplex LC
connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419071-E6** This transceiver
has reached end-of-sale (EOS). For
more information about EOS
transceivers, and recommended
replacements for your product, see
Locating end of sale notices on
page 11.
100BASE-FX
SFP
1300 nm, 100-
Mbps
Ethernet,
multimode
fiber, duplex
LC connector
3.0.0.0 N/A N/A N/A AA1419074-E6
1000BASE-
BX10 DDI SFP
1490 nm (tx)
1310 nm (rx)
gigabit
Ethernet,
single-fiber LC
connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419076-E6 (40 km at 1310 nm)
and mating pair AA1419077-E6 (40
km at 1490 nm)
Important:
Avaya recommends the use of Avaya branded SFP transceivers as they have been through
extensive qualification and testing. Avaya will not be responsible for issues related to non-Avaya
branded SFP transceivers.
For more information about SFP specifications, see SFP specifications on page 30.
Installing an SFP
Install an SFP to provide an interface between the device and the network cable.
SFP transceivers
April 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 27
Comments on this document? [e-mail]