Installation Instructions

Table 14: RJ-45 Port LED state indicators
Label Color and Status Description
Speed/PoE
+
Green, Blink The port is set to operate at 1000 Mb/s with PoE.
Green, Steady The port is set to operate at 1000 Mb/s without PoE
+.
Amber, Blink The port is set to operate at 100 Mb/s with PoE+.
Amber, Steady The port is set to operate at 100 Mb/s without PoE+.
Amber, Green Pulse The port is experiencing a PoE+ error.
Off When the Link/Activity LED is green and the Speed
LED is off, the port is set to operate at 10 Mb/s for all
models.
Link /
Activity
Green, Steady The link established but no data activity exists.
Green, Blink The link is established and data activity exists (the
blink rate indicates the level of activity).
Green, Slow Blink The software disabled the port.
Amber, Steady Port disabled.
Amber, Blink Port not used.
Table 15: SFP transceiver Port LED state indicators
Label Color and Status Description
In Use Green, Blink Not applicable.
Green, Steady The SFP port and the transmit port are active.
Amber, Blink Not applicable.
Amber, Steady SFP Installed—TX Port Inactive
Off No SFP transceiver is present.
Link / Activity Green, Blink Activity exists on the port.
Green, Slow Blink Software disabled this port.
Green, Steady The link is operating normally.
Off No link exists.
Table 16: SFP+ Port LED state indicators
Label Color and Status Description
TX / RX Green, Steady SFP+ detected and link established
Installing the Avaya Virtual Services Platform 4000
46 Installation February 2014
Comments? [e-mail]