Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Avaya Virtual Services Platform 4000 regulatory information and safety precautions
- International regulatory statements of conformity
- National electromagnetic compliance (EMC) statements of compliance
- FCC statement (USA only)
- ICES statement (Canada only)
- CE marking statement (Europe only)
- European Union and European Free Trade Association (EFTA) notice
- VCCI statement (Japan/Nippon only)
- BSMI statement (Taiwan only)
- MIC notice (Republic of Korea only)
- National Safety Statements of Compliance
- EN 60950 statement
- NOM statement (Mexico only)
- Información NOM (unicamente para México)
- Denan statement (Japan/Nippon only)
- National Environmental Statements of Compliance
- Restriction on Hazardous Substances Directive Compliance Statement
- WEEE Directive Compliance Statement
- Notices
- Chapter 2: Introduction
- Chapter 3: New in this release
- Chapter 4: Hardware compatibility
- Chapter 5: Installing the Avaya Virtual Services Platform 4000
- Installation fundamentals
- Electrostatic discharge
- Environmental requirements
- Package contents
- Installing the Avaya Virtual Services Platform 4000 on a table or shelf
- Installing the Avaya Virtual Services Platform 4000 in an equipment rack
- Cable requirements for the Avaya Virtual Services Platform 4000
- Installation and removal of Small Form-factor Pluggable (SFP) transceivers
- RJ-45 connector pin assignments
- Console port pin assignments
- Power specifications for the Avaya Virtual Services Platform 4000
- Avaya Virtual Services Platform power supply power specification
- Installing the Avaya Virtual Services Platform 4000 power supply
- Connect AC power
- Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000
- Chapter 6: Translations of safety messages
Warning:
Disconnecting the AC power cord is the only way to turn off AC power to the Avaya VSP
4000. Always connect the AC power cord in a quickly and safely accessible location in case
of an emergency. For a translation of this statement, see Translations of safety
messages on page 49.
Check Light Emitting Diode (LED) on the Avaya Virtual
Services Platform 4000
The figures and tables in the following sections describe the LEDs on the Avaya Virtual
Services Platform 4000 switches. The tables describe LED operation for a switch that finishes
the power-on self-test.
Front panel LEDs
The following diagrams illustrate the components on the front panels of the Avaya VSP 4000
switches.
• Figure 8: VSP 4850GTS on page 43
• Figure 9: VSP 4850GTS-PWR+ on page 44
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
•
Port LED state indicators on page 45
• Switch LED state indicators on page 44
Figure 8: VSP 4850GTS
1. VSP 4000 USB cover
2. Switch LEDs
Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000
Installation February 2014 43